DRIP – Industrial Dosing Pump

This GATHER dosing pump is the smallest magnetic drive gear pump of product series 1. Having as few as 12 teeth the width of the individual tooth is only 1.5 mm. The pump characteristics and the standard pump casing materials offered can be seen from the characteristic curve diagram and the tables shown below. The pump head is compatible with all drive units of product series 1 with X-magnet system. At a capacity ranging between 0.3 and 83.3 ml/min a highly precise dosing performance is achieved with this pump.

Materials

Pump casing: Stainless steel (1.4404 and 1.4571)
Hastelloy® C-276 (2.4819)

Pump characteristics

Flow rate: Q = 0.02 – 5.00 l/h = 0.33 – 83.33 ml/min
Temperature range: -60°C to +300°C
Differential pressure: Δp up to 6.0 bar
Viscosity: η = 0.3 bis 1,000 mPa s

Downloads
  • PDF Files
    • Operating manual
      Pumps

      Filesize: 766,92 KB

    • CIP cleaning

      Filesize: 163,99 KB

    • ATEX information

      Filesize: 138,67 KB

    • Material combinations

      Filesize: 148,92 KB

    • Performance curve
      Series DRIP

      Filesize: 105,15 KB

    • Operating Instructions
      Control Unit LAB22-ST/A

      Filesize: 319,05 KB

Copyright © 2018 GATHER Industrie GmbH

All rights reserved
Design & programming

contecco GmbH